Audioflow 3 Way Speaker Switch

Audioflow 3-Way Smart Speaker Switch

The 3-way speaker switch for separating out audio zones on a single Amp can be controlled completely wirelessly using the Audioflow App on your phone. This compliments streaming ecosystems such as Sonos and Bluesound as everything is completely wireless.

• 3-way speaker switch to separate up 3 to separate audio zones
• Control via Wi-Fi with the Audioflow app or Amazon Alexa Voice Assistant
• Front touch controls and digital display screen
• Rated for amplifier outputs up to 300W at 8Ω

How It Works

The speaker cable for up to 3 pairs of speakers would be run back to the Audioflow switch and connect to the inputs marked “Zone A, Zone B’ etc. You’d then need to connect your amplifier to the switch using speaker cable to the input marked ‘Amp In’. The Power supply can then be connected to the switch for power.

Once set up, you will then need to download the Audioflow App on your iOS or Android device. The Audioflow Switch should then be automatically discovered by your device, but you can follow in-app steps to connect if not.

FAQs

Q. Do I need to use the Audioflow App?
A. You can use either the App or the front control buttons on the switch itself to control which zones

Q. What Wifi Standard will the Audioflow Switch Support?
A. This switch is a 2.4GHz device and will not support 5GHz Wi-Fi

Q. What happens when all Zones are turned off?
A. When all zones are turned off the switch will introduce a 200Ω ‘dummy load’ so that the amplifier output doesn’t suddenly become an open circuit

Q. What cable can the Audioflow Switch support?
A. Maximum cable thickness is 2.5mm or 14 Gauge